KE 555 / KE 560 BALER
Other Details
GENERAL INFORMATION
- Heavy flywheel, counterweight and roller-mounted ram provide robust, heavy-duty work
- Shaft system connected directly to the transmission
- Double support wheel offers protection in all rough field conditions
- Hydraulic Pick up gives precise movement which can work in any condition on the field
- Side clamping system, specifically designed for shaper and more stable bales
- World famous knotter set provides non-stop productivity
- Needles protecting by their cover in all rough field conditions
- The knotter set is clean and operative all the time with the performance of fan system
TECHNICAL DETAILS
| KE 555 / KE 560 BALER | ||
|---|---|---|
| BALE SPECIFICATION | ||
| Bale Dimensions | mm | 360 x 460 |
| Stroke | mm | 710 |
| Piston Speed | Stroke / Min. | 93 |
| Feeding Opening | cm2 | 1500 |
| BALE | ||
| Bale Length | mm | 300 – 1350 |
| Bale Weight | kg | 20-35 |
| Productivity | bale/h | 250 |
| Knotter Set | 2 Twines / Wire | |
| PICK – UP SYSTEM | ||
| Pick-Up Width | mm | 1650 / 1790 |
| Bar Gap | mm | 70 |
| Tine Bars | 5 Bars | |
| Number of Tines | pcs | 100 / 110 |
| BALER DIMENSIONS | ||
| Tire Right | 225 / 70 / R15 | |
| Tire Left | 10.0 / 75 – 15,3 Tubles 10 PLY | |
| Rear Middle Support Wheel | 16,5 x 6,50 – 8 6 PR | |
| Support Wheel | 400 x 8 6 PR | |
| Weight | kg | 1716 / 1790 |
| Length of Baler (on road) | mm | 5050 |
| Length of Baler (on duty) | mm | 6080 |
| Width of Baler | mm | 2370 |
| Height of Baler | mm | 1820 |
| Minimum Power Requirement | HP | 45 |
| PTO drive | 1/min. | 540 |
| Transmission | 2 Shaft | |